Autoplay
Autocomplete
Previous Lesson
Complete and Continue
MikroTik Wireless Engineer with LABS
WLAN Fundamental
Intro: WLAN Fundamental (1:10)
Understand the Wireless terminology (12:32)
Wireless Tools on MikroTik
Intro: Wireless Tools on MikroTik (0:54)
Frequency usage - Spectral Scan - Spectral History (13:15)
MikroTik Wireless Alignment tool (8:45)
Wireless Snooper and Sniff Tool (13:16)
Wireless Scan Tool and Reset Configuration (8:29)
Wireless Frequency mode and TX power change
Intro: Wireless Frequency mode (1:19)
MikroTik Frequency modes Regulatory-domain Manual Tx power Superchannel (13:43)
Changing the TX power for a better signal reception (10:36)
MikroTik Wireless Data rate and chains
Intro: Wireless data rate and chains (1:04)
Wireless Chains and difference between SISO and MIMO (9:18)
Avoid Data Rate flapping using the basics and supported data rate options (13:43)
Wireless Link Quality - Troubleshooting
Intro: Wireless Link troubleshooting (1:08)
Wireless SNR CCQ and HW Frames (19:22)
Advanced Distance Noise Floor Threshold and HW Fragmentation Threshold (9:32)
RTS CTS to Self HW protection Threshold and Adaptive Noise Immunity (14:48)
Channel Width, Channel Bonding & Guard interval
Intro: What is channel width channel bonding and guard interval (1:04)
Channel Width and Channel Bonding (11:31)
Changing the Guard interval for more or less throughput (17:53)
Wireless Protocols: Nstreme vs NV2
Intro: Nstreme vs nv2 (1:05)
Configuring Nstreme and NV2 wireless protocols on MikroTik Routers (22:02)
NV2 additional settings (7:59)
Nstreme Dual
Intro: What is Nstreme Dual (2:16)
Configuring Nstreme Dual for a Wireless Point-to-Point link (17:05)
Wireless Bridging on MikroTik
Intro: Wireless Bridging (1:52)
Station Bridge mode on MikroTik (17:04)
Station pseudobridge and Station pseudobridge clone modes on MikroTik (10:02)
MikroTik Wireless Repeater
Intro: What is a wireless repeaterzip (1:00)
Configuring the router as a wireless repeater using the repeater setup (10:06)
Wireless Bridging using EOIP and MPLS/VPLS
Intro: Wireless bridging with EOIP and MPLS VPLS (1:55)
Configuring Wireless Bridging using EOIP Tunnel (11:58)
Configuring Wireless Bridging using MPLS VPLS Tunnel (9:52)
Wireless Security
Intro: Wireless Security (1:37)
Wireless security using Dynamic Static keys and EAP (20:37)
Management Protection to forbid De-authentication attacks on Wireless (7:41)
Default Authenticate and Access list (18:47)
Connect list to allow the station to connect to the right AP (17:38)
Wireless WDS and Mesh
Intro: WDS (1:03)
Configuring WDS Dynamic mode using Station WDS and WDS Slave (21:48)
Configuring WDS Static mode using Station WDS and WDS Slave (7:52)
Wireless Mesh using HWMP for good wireless roaming (17:48)
Thank You + Next Steps
Thank You – Feedback, Rewards & More
Configuring Nstreme and NV2 wireless protocols on MikroTik Routers
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock