Autoplay
Autocomplete
Previous Lesson
Complete and Continue
ISP Core Network Setup with MikroTik
Introduction
1- Prerequisites for this course (4:00)
Setting up the ISP core network
2- BGP peering and publishing the public IP range (17:49)
3- Configuring OSPF in the ISP core network with VLANs and Failover (17:21)
4- Configuring OSPF on the remaining core routers (10:53)
5- Provide Internet service to customers using public IPs (12:06)
6- Configure Intranet between 2 offices of same customer using MPLS VPLS (22:36)
7- Configure Management VLAN interfaces to reach the customers routers (12:54)
8- Assign bandwidth speed to the customers using Queue Trees (8:02)
2- BGP peering and publishing the public IP range
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock